How To flush DNS on you desktop computer

If you get a Ip conflict on your network you need to flush out the DNS on that systems.

n Microsoft Windows, you can use the command ipconfig /flushdns to flush the DNS resolver cache. Open the command prompt and type the following:

C:>ipconfig /flushdns
Windows IP Configuration
Successfully flushed the DNS Resolver Cache.




 The above command will completely flush the DNS, deleting any incorrect entries too. You can also use the command ipconfig /displaydns to view the DNS resolver cache.

Turning Off DNS Caching under Microsoft Windows

If you experience frequent issues with DNS caching under Microsoft Windows, you can disable client-side DNS caching with either of these two commands:

net stop dnscache
sc servername stop dnscache

This will disable DNS caching until the next reboot. To make the change permanent, use the Service Controller tool or the Services tool to set the DNS Client service startup type to Disabled. You can permanently disable DNS Client by following the below steps:

• Goto Start and click on Run.
• Type Services.msc in the Run command box.
• A window listing all the services will popup. Search for a service called DNS Client.
• Double click on the listed DNS Client service and click Stop. Similarly, you can restart it by clicking Start.

Tuning DNS Caching under Microsoft Windows

You can modify the behavior of the Microsoft Windows DNS caching algorithm by setting two registry entries in the HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesDnscacheParameters registry key.

The MaxCacheTtl represents the maximum time that the results of a DNS lookup will be cached. The default value is 86,400 seconds. If you set this value to 1, DNS entries will only be cashed for a single second.

MaxNegativeCacheTtl represents the maximim time that the results of a failed DNS lookup will be cached. The default value is 900 seconds. If you set this value to 0, failed DNS lookups will not be cached.

Flush DNS in Mac OSX

In Mac OSX Leopard, you can use the command dscacheutil -flushcache to flush the DNS resolver cache:

bash-2.05a$ dscacheutil -flushcache

In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performed the same task:

bash-2.05a$ lookupd -flushcache

Flush DNS in Linux

In Linux, the nscd daemon manages the DNS cache. To flush the DNS cache, restart the nscd daemon. To restart the nscd daemon, use the command `/etc/init.d/nscd restart`.get more help

Read More

How to configure the size limit for both (.pst) and (.ost) files in Outlook 2010, Outlook 2007, and in Outlook 2003

microsoft outlook max out at 2GB, you can edit the register and make it go up to 20GIG.

Follow these steps to configure the size limit for both the .pst and the .ost files.

Note The settings that are discussed in this article apply to both .ost and .pst files. If you modify these registries, this can affect .ost files that are used with Cached Exchange Mode, with AutoArchive, and with .pst. files.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

1. Click Start, and then click Run.
2. In the Open box, type regedit, and then click OK.
3. In the left pane, expand My Computer, and then expand HKEY_CURRENT_USER.
4. Expand Software, and then expand Policies.
5. Expand Microsoft, and then expand Office.
6. Expand 11.0 for Outlook 2003, 12.0 for Outlook 2007, or 14.0 for Outlook 2010, and then expand Outlook.
7. Click PST, and then right-click MaxFileSize in the right pane.
8. Click Modify, and then type the value in the Value data box.
9. Click OK.
10. Right-click WarnFileSize, and repeat steps 8 through 9.
11. Right-click MaxLargeFileSize, and repeat steps 8 through 9.
12. Right-click WarnLargeFileSize, and repeat steps 8 through 9.

Note You may have to create the registry values if they do not exist. If the registry values do not exist, follow these steps to create them.

1. Click Start, click Run, type Regedit, and then click OK.
2. In the left pane, expand following registry key:

For Outlook 2010
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook
For Outlook 2007
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Outlook
For Outlook 2003
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\11.0\Outlook
3. On the Edit menu, point to New, and then click Key.
4. Type PST, and then press ENTER.
5. On the Edit menu, point to New, and then click DWORD value.
6. Type MaxFileSize, and then press ENTER two times.
7. In the Edit DWORD Value window, type the value in the Value data box, and then click OK.
8. Repeat steps 3 through 7 to create another DWORD WarnFileSize.
9. Repeat steps 3 through 7 to create another DWORD MaxLargeFileSize.
10. Repeat steps 3 through 7 to create another DWORD WarnLargeFileSize, and then close the registry.

Note For mass deployment of these registry keys on end-user machines, the ORK tool can be used.

To automate the registry creation on end-user machines, use ORK for deployment scenarios.
It is recommended that the values between the MaxFileSize registry entry and the WarnFileSize registry entry, and the values between the MaxLargeFileSize registry entry and the WarnLargeFileSize registry entry be at least 5 percent (%) so that internal processes are not hindered from continuing.

If the value of the MaxFileSize registry entry ever exceeds the ANSI 2 gigabyte (GB) limit on either the .pst or the .ost files, the value will be ignored to limit the size to 2 GB to prevent corruption. The default value for the WarnFileSizeregistry registry entry is calculated to be 95% of the MaxFileSize registry entry for a UNICODE file, and it remains at 1,950,368,768 bytes for small ANSI files.

Note You can set the UNICODE limits beyond the values that are listed in the table. However, we do not recommend doing this because performance can decrease.

If .ost files or .pst files reach the limit that is specified in the WarnFileSize or the WarnLargeFileSize registries, the compaction function is triggered to try to reduce the size of the file to a usable level. When the WarnFileSize or the WarnLargeFileSize limit is reached, e-mail messages cannot be sent (provided that sent e-mail messages are stored in the Sent Items folder), and items cannot be copied or moved within the file. If the file is an archive .pst file that is used for AutoArchive, the AutoArchive operation will fail. However, e-mail messages can be deleted or archived from a .pst or from an .ost file that is currently being used as the default delivery location.

The following are some of the errors that may occur when files reach the maximums specified in the registries:

* When you try to move items to a .pst or an .ost file that has reach the limit, you receive the following error message:
Can't move the items. The file \.pst has reached its maximum size. To reduce the amount of data in this file, select some items that you no longer need, and then permanently delete them.
* When e-mail messages are delivered to a .pst or an .ost file that are using Cached Exchange Mode, and the file has reached the limit, the Mailbox Cleanup wizard launches.

http://support.microsoft.com/kb/832925/

Read More

IE8, IE9 really Slow when I click on it.

IE8 slow when you click on it.

ZDNet published the results of some performance testing involving the current crop of browsers. During the course of my research, I stumbled across a tweak that I was at first hesitant to publish. After thinking carefully about it, I decided to do so. I’m glad I did. I have now heard from easily a dozen people via e-mail and in comments who say the improvement in performance for them is amazing.

Please read the original post (Is IE8 really fat and slow?) to get the full background. If you’re experiencing problems with IE8 being slow to load pages, especially when multiple tabs are involved, this might be worth a try. Because this tweak is simply registering a DLL that should have been registered as part of the IE8 installation, there is no harm that can come from trying this.

Here are the instructions.

FOR WINDOWS XP

1. Click Start, then click Run.

2. In the Run dialog box, type cmd and press Enter.

3. In the Command Prompt window, enter this text and press Enter:

regsvr32 actxprxy.dll

4. Restart your computer.

FOR WINDOWS VISTA/WINDOWS 7

1. Type cmd in the Start menu Search box.

2. Right-click the Cmd shortcut that appears at the top of the search results list, Under Programs, as shown here.

3. Choose Run As Administrator.

4. In the Command Prompt window, enter this text and press Enter:

regsvr32 actxprxy.dll

5. Restart your computer.

If this works for you, let me know in the comments below…

Read More

Ten tips to make email more productive

Ever been overwhelmed by emails at work? Experts report billions of emails
are sent every day and they’re still increasing. With so many messages
arriving throughout the day, email can easily become a continual interruption
and distraction from getting real work accomplished. Here are some useful tips
that will help give you more control over your time and increase your efficiency.

1 Put email on a schedule

Instead of reading and responding to emails as they arrive, set aside
specific times of day for them. This can vary from one to three or four times
a day, depending on your situation. If you’re in the habit of monitoring
your email continually it may take extra effort to change your behavior,
but once you do you’ll soon find yourself getting more accomplished.
2 Get set-up for success
Once you’ve established specific times for email, set-up some new rules
for your email application to help. Instead of automatically checking for
new messages every minute, adjust your application to check at a more
appropriate interval. You can also disable delivery previews and sounds to
reduce email’s intrusion into your productivity.
3 Read it and deal with it
Some messages are simply information, but others require action. Make
a renewed effort to deal with emails as you read them—reply, file, delete,
or print. If you don’t, you’ll end of up reading the same message two or
more times. In fact, if you know in advance that an email will take some
concentrated effort, don’t read it until you have the time to deal with it.
4 Put the subject line to work
When you write an email, take a moment to ensure the subject line is as
clear and complete as possible. For example, “Need feedback on Jones
Sales Presentation (attached) by Friday” is much more productive than
simply “Sales Presentation Review.”
5 Make the subject the message
When your message is very short use the subject line for the entire
message. For example, “Reminder: Feedback on Jones Sales Presentation
Due Today (EOM).” Use End of Message (EOM) so recipients know the
body of the email is blank and won’t waste time opening it.
6 Keep your message focused
When most people read on-screen they tend to scan. Big blocks of text
discourage readers and information is more easily overlooked. Keep your
emails short, to-the-point, and clear. Here are some tips to help:
• Add a space between paragraphs
• Use bullet points to improve readability
• List action items (with names)
• Use separate emails for disparate topics

more info go to: EliteBuyer.com

Read More

Burn DVD on Window 7 Pro

#1 - Download and install ImgBurn

Rather that try muddling through with burning the .ISO file with whatever tools you might already have installed, download ImgBurn and use that. That way we’re all on the same page!

#2 - Burn the .ISO file to DVD

OK, pop a blank DVD into your DVD writer drive (for now I’m assuming that you actually have a DVD writer, if you don’t I’ll show you something else you can do in a moment). With that done, fire up ImgBurn. SelectWrite image file to disc.

Point the Source to the .ISO file you downloaded and then click on the big button at the bottom-left of the window to kick off the disc writing process.

And then after a short wait, you’re done!

Now you’ve successfully burned the .ISO file to the DVD … congratulations!

#3 - Use the DVD

You can now use the DVD like any other OS install disc … pop it in the DVD drive of the system you want to install Windows 7 onto and boot up the PC and you should get that Press any key to boot from CD or DVDmessage. Press any key to kick off the proceedings!

Note: If you don’t get that Press any key to boot from CD or DVDmessage then you’ll need to dig out your motherboard manual and twiddle with the boot device settings.

Read More

Sync iphone with Google Ca

Google Sync: Set Up Your Apple Device for Google Sync
Share

* Twitter
* Gmail
* Blogger
* Buzz
* Orkut
* Google Reader
* Bookmarks
* » More

Comment

To set up Google Sync on your iPhone, iPad or iPod Touch device, please follow the steps below.

Requirements and Upload
1. Google Sync is only supported on iPhone OS versions 3.0 and above. You can check your current version by going to Settings > General > About > Version. To upgrade, follow the instructions at http://www.apple.com/iphone/softwareupdate/. Please upgrade to iPhone OS 3.0 before setting up Google Sync.

2. Perform a sync with iTunes to ensure that Contacts and Calendars from your iPhone are backed up to your computer. Learn more about backing up your Contacts and Calendars.

3. If your business, school, or organization uses Google Apps, your administrator will first need to enable Google Sync before you can take advantage of this feature. Note that if you enable Google Sync, your administrator may also exercise additional remote management capabilities (such as remote wipe or password requirements). Click to learn more or contact your administrator.

Getting Started
1. Open the Settings application on your device's home screen.
2. Open Mail, Contacts, Calendars.
3. Tap Add Account....
4. Select Microsoft Exchange. OS 4.0+ now allows multiple Exchange accounts. However, if you're on a device that doesn't let you add a second account, you could also use CalDAV to sync Google Calendar and IMAP to sync Gmail.



settings mail calendar contacts on iphone add mail calendar contacts account on iphone microsoft exchange
Enter Account Info
5. In the Email field, enter your full Google Account email address. If you use an @googlemail.com address, you may see an "Unable to verify certificate" warning when you proceed to the next step.
6. Leave the Domain field blank.
7. Enter your full Google Account email address as the Username.
8. Enter your Google Account password as the Password.
9. Tap Next at the top of your screen.
9a. Choose Cancel if the Unable to Verify Certificate dialog appears.
10. When the new Server field appears, enter m.google.com.
11. Press Next at the top of your screen again.

exchange domain exchange server

12. Select the Google services (Mail, Calendar, and Contacts) you want to sync.

13. Unless you want to delete all the existing Contacts and Calendars on your phone, select the Keep on my iPhone option when prompted. This will also allow you to keep syncing with your computer via iTunes.

If you want to sync only the My Contacts group, you must choose to Delete Existing Contacts during the Google Sync install when prompted. If you choose to keep existing contacts, it will sync the contents of the "All Contacts" group instead. If there are no contacts on your phone, the latter will happen -- the contents of your All Contacts group will be synced.

iphone exchange mail calendars contacts exchange keep on my iphone

You've set up Google Sync! Synchronization will begin automatically if you have Push enabled on your device. You can also open the Mail, Calendar or Contacts app and wait a few seconds to start a sync.

Next choose which calendars to sync, if you'd like to enable multiple calendars.

Call us at 562-366-4177 : elitebuyer.com

Read More

Yardi error Data21

to fix this prolem
goto that yardi folder
goto PMV
open pm.ydd with notepad
write as follows.
"data21","6"
save and reopen the data folder.

Read More